Wire Mesh Johor Bahru (JB), Johor Supplier, Suppliers, Supply, Supplies

BRC Wire Mesh also known as Steel Welded Mesh is made of reinforcing steel which is necessary in all types of concrete construction.

Concrete is weak in tension, therefore BRC Wire Mesh with high yield strength cold-drawn wires of small size and close spacing reinforcement must be used to provide well distributed tensile reinforcement that is entirely adequate.

Square Mesh
Ref. No.	B.S.4483 or MS 145 Ref. No.	Longitudinal Wires		Cross Wires		Cross-Sectional Area		Mass Per Unit Area kg/m²
Ref. No.	B.S.4483 or MS 145 Ref. No.	Size (mm)	Spacing (mm)	Size (mm)	Spacing (mm)	Long'L (mm²/ m)	Cross (mm²/m)	Mass Per Unit Area kg/m²
A12	A565	12	200	12	200	565	565	8.88
A10	A393	10	200	10	200	393	393	6.16
A9	A318	9	200	9	200	318	318	4.99
A8	A252	8	200	8	200	252	252	3.95
A7	A193	7	200	7	200	193	193	3.02
A6.5	A166	6.5	200	6.5	200	166	166	2.61
A6	A142	6	200	6	200	142	142	2.22
A5	A98	5	200	5	200	98	98	1.54
A4	A63	4	200	4	200	63	63	0.99

*Rectangular Mesh*
Ref. No.	B.S.4483 or MS 145 Ref. No.	Longitudinal Wires		Cross Wires		Cross-Sectional Area		Mass Per Unit Area kg/m²
Ref. No.	B.S.4483 or MS 145 Ref. No.	Size (mm)	Spacing (mm)	Size (mm)	Spacing (mm)	Long'L (mm²/ m)	Cross (mm²/m)	Mass Per Unit Area kg/m²
B12	B1131	12	100	8	200	1131	252	10.90
B10	B785	10	100	8	200	785	252	8.14
B9	B636	9	100	8	200	636	252	6.97
B8	B503	8	100	8	200	503	252	5.93
B7	B385	7	100	7	200	385	193	4.53
B6	B283	6	100	7	200	283	193	3.73
B5	B196	5	100	7	200	196	193	3.05

Long Rectangular Mesh
Ref. No.	B.S.4483 or MS 145 Ref. No.	Longitudinal Wires		Cross Wires		Cross-Sectional Area		Mass Per Unit Area kg/m²
Ref. No.	B.S.4483 or MS 145 Ref. No.	Size (mm)	Spacing (mm)	Size (mm)	Spacing (mm)	Long'L (mm²/ m)	Cross (mm²/m)	Mass Per Unit Area kg/m²
C10	C785	10	100	6	400	785	71	6.72
C9	C636	9	100	6	400	636	71	5.55
C8	C503	8	100	5	400	503	49	4.34
C7	C385	7	100	5	400	385	49	3.41
C6	C283	6	100	5	400	283	49	2.61
C5	C196	5	100	5	400	196	49	1.93

Rectangular Mesh
Ref. No.	B.S.4483 or MS 145 Ref. No.	Longitudinal Wires		Cross Wires		Cross-Sectional Area		Mass Per Unit Area kg/m²
Ref. No.	B.S.4483 or MS 145 Ref. No.	Size (mm)	Spacing (mm)	Size (mm)	Spacing (mm)	Long'L (mm²/ m)	Cross (mm²/m)	Mass Per Unit Area kg/m²
DA12	DA1131	12	100	12	100	1131	1131	17.75
DA10	DA785	10	100	10	100	785	785	12.32
DA9	DA636	9	100	9	100	636	636	9.98
DA8	DA503	8	100	8	100	503	503	7.90
DA7	DA385	7	100	7	100	385	385	6.04
DA6	DA283	6	100	6	100	283	283	4.44
DA5	DA196	5	100	5	100	196	196	3.08
DA4	DA126	4	100	4	100	126	126	1.97

BRC WIRE MESH

BRC Wire Mesh (Hard Drawn)

Galvanised Wire Mesh (6)

View All

Galvanized wire mesh is the wire mesh made by Hot Dipped Galvanized Wire or Electro wire

It will normally be used in animal cage structuring, fabricating the wire boxes, grilling, partition making, grating purposes and machine protection fencing.

Below are the list of specification:

Quality	Hot Dipped Galvanized Wire / Electro Galvanized Wire
Size	6' X 10' (common)
Wire Spacing	2" X 2" (50mm X 50mm) / 2" X 1" (50mm X 25mm)

Product Code	Wire dIameter
228	3.7mm - 4.0mm
229	3.2mm - 3.5mm
2210	2.7mm - 3.0mm
2211	2.4mm - 2.6mm
2212	2.1mm - 2.2mm
2214	1.9mm - 2.0mm
2216	1.5mm - 1.6mm
2110	2.7mm - 3.0mm
2111	2.4mm - 2.6mm

The products above are the common product with ready stock available.
Special sizes available at request.

Gi Wire Mesh

GI Wire Mesh

BRC Wire Mesh Roll (3)

View All

BRC Wire Mesh also known as Steel Welded Mesh is made of reinforcing steel which is necessary in all types of concrete construction. The coverage area for the BRC Wire Mesh roll is bigger and thinner compare to BRC in sheet. Normally use in walk way which require lower pressure resistance.